Automatic Tape Sticking Machine

Product model: ZH-TJD-01 
Scope of application: General 
Conveying method: motor-driven

※ Functions and Features
1. Adhesive tape application method: The number of adhesive tape points is 210, and the battery cells have 30 points. (The points are evenly distributed, and the specific number of synchronizations depends on the type of plate.) Four robotic arms work simultaneously, and each robotic arm has two sponges to adsorb the material heads, cycle to grab the adhesive tape, and paste it. Done; 
2. Tape specifications: The standard width of the tape is 8mm, and the inner diameter of the inner support ring of the tape is less than or equal to a diameter of 79mm and greater than or equal to a diameter of 77.5mm. The roll thickness is from 5mm to 30mm on one side, and it is also compatible with roll thicknesses from 5mm to 55mm on one side. 
3. Other requirements such as the material of the tape: compatible with most commonly used tapes on the market; 
4. Tape application cycle time: 4 heads applied 8 times, 20 seconds; 
5. The equipment automatically applies tape, and the size, quantity, and position of the tape can be adjusted; 
6. Tape replacement time ≤ 2 minutes; 
7. Common troubleshooting guidelines and self diagnostic functions, with a failure rate of ≤ 1%; 
8. Tape residue prediction function; 
9. Paste quality requirements: Paste smoothly without wrinkles; The deviation of the pasting position is ≤± 2mm; 
10. The requirement for component battery cell damage rate caused by equipment reasons is ≤ 0.01% (monthly average); 
Equipment tape adhesion failure rate ≤ 0.05% (monthly average)

※ Application